<sub id="v8xou"><listing id="v8xou"></listing></sub>
  1. <form id="v8xou"><pre id="v8xou"></pre></form>
    1. <nav id="v8xou"></nav>
      <wbr id="v8xou"></wbr>
    2.  

      客服中心
      热线电话
      0755-88299956
      上班时间
      周一到周五
      E-mail地址
      info@topquality.cn
      二维码
      图片展示
      产品中心

      联系我们

      服务热线

      0755-88299956

       

      电话:0755-88299956
      传真:0755-88299954
      信息咨询:info@topquality.cn
      购买仪器:sales@topquality.cn
      技术:support@topquality.cn

      招骋:master@topquality.cn

      NNHV 8123

      主要特点
      HV-LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1

      附件下载

      技术参数

       型号

      描述

      NNHV 8123

      High Voltage LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1 to measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV), can be used for BCI with an external dummy load,

      impedance (5μH) || 50 Ohm. 70 (100) A, 1000 V DC. Backside with built in

      0.1 microfarad capacitor to ground, N-jack. Normally used in pairs inside the enclosure HVSE 8600!

      NNHV 8123-200

      High Voltage LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1 to measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV), can be used for BCI with an external dummy load,

      impedance (5μH) || 50 Ohm. 200 A, 1000 V DC. Backside with built in

      0.1 microfarad capacitor to ground, N-jack. Normally used in pairs inside the enclosure HVSE 8600!

      NNHV 8123-400

      High Voltage LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1 to measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV), can be used for BCI with an external dummy load,

      impedance (5μH) || 50 Ohm. 400 A, 1000 V DC. Backside with built in

      0.1 microfarad capacitor to ground, N-jack. Normally used in pairs inside the enclosure HVSE 8600!

      NNHV 8123-800

      High Voltage LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1 to measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles

      (HEV, EV), can be used for BCI with an external dummy load, impedance (5μH)||50 Ohm. 800 A, 1000 V DC. Backside with built in

      0.1 microfarad capacitor to ground and suitable discharge resistor, N-jack. To be used in pairs inside a shielded enclosure HVSE 8601!

      HVSE 8600

      Shielded housing for 2 HV-LISN, 2 paths with cable feed throughs for HV+ and HV-, shield can be connected to the housing, 2 measurement ports N, 1 monitor port N, with connecting cables between inside measurement ports and outside N-connectors. All models of the NNHV- and NNBM-series can be inserted. For full CISPR 25 Ed. 4 compliance a modification of the back side circuitry of the NNBM series is required!

      Opt. 8600-blanco

      1 pair of flange panels for HVSE 8600. Mains side with no connector or feed through. DuT side with only 2 x N-feed throughs for AUX and 2 x N feedthroughs for RF-HV+ and RF- HV-. Feed throughs for HV+ and HV- must be drilled and assembled by customer.

      Opt. 8600-100

      1 pair of flange panels for HVSE 8600 with cable feed throughs for shielded cables up to ca. 100 A.

      Opt. 8600-200

      1 pair of flange panels for HVSE 8600 with cable feed throughs for shielded cables suitable for max. currents in a range of ca. 100 A to 200 A.

      Opt. 8600-400

      1 pair of flange panels for HVSE 8600 with cable feed throughs for shielded cables suitable for a range of ca. 200 A to 400 A.

      HVSE 8601

      Shielded housing for 2 units of HV-LISN NNHV 8123-800, with cable feed throughs for HV, shield can be connected to the housing, 2 measurement ports N, 2 monitor ports N, with connecting cables between inside measurement ports and outside N-connectors.

      Opt. 8601-800

      1 pair of flange panels for HVSE 8601 with cable feed throughs for shielded cables suitable for a range of ca. 400 A to 800 A.


      HV-LISN acc. to ECE R10.06, CISPR 12 and PSA-1

      NNHV 8123-400R

      High Voltage LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1 with C2=0.1 microfarad switchable to ECE R10 with C2=1.0 microfarad to measure the con- ducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV), can be used for BCI with an external dummy load, impedance (5μH) || 50 Ohm. 400 A, 1000 V DC. Backside with built in 0.1/1.0 microfarad capacitor switchable, N-jack. Normally used in pairs inside the enclosure HVSE 8600!

      CAP 0.9-400

      0.9 microfarad capacitor built into an adapter, which can be applied to the mains terminals of the NNHV 8123-800 or NNHV 8123-400 for the standards ECE R10.06, CISPR 12 and PSA 9829, 9831


      NNHV 8123
      主要特点
      HV-LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1
      长按识别二维码查看详情
      长按图片保存/分享
      询盘

      在线询盘 更多+
      • 联系人 *

      • 手机 *

      • 描述

      • 提交

      • 验证码
        看不清?换一张
        取消
        确定

      咨询内容:


      你还没有添加任何产品

      加入成功
      询盘

      在线询盘 更多+
      • 联系人 *

      • 手机 *

      • 描述

      • 提交

      • 验证码
        看不清?换一张
        取消
        确定

      咨询内容:


      你还没有添加任何产品

      加入成功

      走进我们

       

      公司介绍

       

      新闻动态

       

      客户案例

      公司新闻

       

       

      联系我们

       

      联系方式

       

      深圳市拓科锐科技有限公司    Copyright 2022   

      添加微信好友,详细了解产品
      使用企业微信
      “扫一扫”加入群聊
      复制成功
      添加微信好友,详细了解产品
      我知道了
      国产精品午夜福利在线观看免费,亚洲精品乱码久久久久久欲爱,亚洲精品中日韩精品无码,国产亚洲精品视频中文字幕,精品免费囯产一区二区三区四区